Foam & sponge

 Foams & sponges, open cell & closed cell from a variety of material such as epdm, neoprene, pvc nitrile, silicone, as well as polyethylene, plastizote & more. Many foams can be produced with a self adhesive backing. We also supply furniture foam, which can be used for more than just furniture.

                     

 

Sponge Product Guide

A wide range of sponge/foam products to suit your requirements. Supplied in sheet or strip form with a self adhesive backing if required.

PVC NITRILE— Good resistance to oil, petrol & weathering

Closed cell construction with a skin finish

Temp –30 to +70 degrees C

Density 80-130kg per m3

EPDM—Highly resistant to ozone & weathering

Closed cell construction with good recovery

Temp –40 to + 100 degrees C

Density 100-180kg per m3

NEOPRENE– Oil, weather & ozone resistant

Closed cell construction

Temp –40 to +100 degrees C

Density 100-180kg per m3

POLYETHYLENE— Oil & weather resistant

Closed cell construction

Temp –70 to + 110 degrees C

Density 45kg per m3

POLYETHER—Good lightweight general purpose indoor sealing product

Open cell construction

Temp –15 to 105 degrees C

Density 20kg per m3

PVC—Good weather resistance & sealing capabilities.

Closed cell construction with skin finish

Temp –30 to + 70 degrees C

Density 100kg per m3

Silicone– Good UV & Ozone, high temperature range.

Closed cell construction with skin finish

Temp –60 to 200 degrees C

Density 190-310kg per m3

 

Other sponges are available, these being the most popular. Please contact us if you require any other information than listed above.

 

Sponge cords—available in many diameters

from 3mm to 25mm, an excellent sealing

product in recessed areas or where an

o-ring should reside.

Foam & sponge Products per page: 5 | 10 | All